HP Workstation xw4100 Hardware Installation Manual

Also see for FL863UT - Workstation - Z400: Hardware installation Software installation Installation guide Faq Installation guide

Contents

Installing an HP Solenoid Lock and HoodSensorIntroductionThe side access panel Solenoid Lock is designed to prevent unauthorized removal of the computercover. The side access panel may be locked by using a local or remote signal-controlled solenoid.The Hood Sensor is designed to notify the user of any removal of the computer cover.Kit contents● Solenoid Lock assembly, including solenoid, bracket, and cable● Two tamper-resistant screws● Solenoid Lock FailSafe Key● Sensor and power cable● Sensor bracket● Two sensor bracket screws● Warranty information● This installation guideBefore you beginTo determine the compatibility of this product with your HP computer, see QuickSpecs online athttp://www.hp.com/go/productbulletin.Installing the Solenoid Lock and Hood Sensor in HP WorkstationsInstallations in HP Workstations, such as the HP Z600 Workstation series, may be different.Complete installation and removal procedures for this product are included in the service guide foryour workstation model, available at http://www.hp.com/support/manuals.© 2004–2010 Hewlett-Packard Development Company, L.P. Printed in the U.S.ENWW Introduction 1