HP TFT5600 Installation Instructions Manual

Also see for TFT5600: User guide

Contents

HP CONFIDENTIAL Writer: Amy L. Laffitte Codename:RUGER Part Number: 230201-022 Last Saved On: 9/3/02 3:33 PMhp TFT5600rackmount keyboardand monitorinstallation instructionsRead Instructions CompletelyBefore Beginning Installation ProceduresHewlett-Packard Company shall not be liable for technical or editorial errors oromissions contained herein. The information in this document is provided “as is”without warranty of any kind and is subject to change without notice.The warranties for HP products are set forth in the express limited warrantystatements accompanying such products. Nothing herein should be construed asconstituting an additional warranty.Second Edition (September 2002)Part Number 230201-022230201- 022About this DeviceThe TFT5600 Rackmount Keyboard and Monitor (RKM) is arack-mountable 1U integrated flat panel monitor, with a 15-inch(38.1 cm) color active matrix Thin Film Transistor (TFT) LiquidCrystal Display (LCD), and keyboard with hot keys and track ball.NOTE: 1U= 1.75 inches or 44.45 cmThe TFT5600 RKM is mounted on rails with space to add the HP1U switch box behind the unit. The TFT5600 RKM can be usedwith all Compaq 9000 Series racks and HP 10000 Series racks.Kit ContentsBelow are the items and quantities required for assembly:• M-6 cage nuts (2)• M-6 screws (8)• 6-32 screws (12)• Mounting rails with slide (2)• Cable management arm (1)• Brace (1)• TFT 5600 RKM (1)• Lock plate (2)• Rack template (1)This kit may contain extra pieces of hardware for yourconvenience.Optional Equipment• Video Connector Adapter Option Kit (Part number149361-B21)—The video connector adapter provides aninterface for video connectors that are missing pin 9.Tools Required• Phillips screwdriver• T-15 Torx driverRack ConsiderationsBefore beginning these procedures, make sure you understand andfollow these precautions:WARNING: To reduce the risk of personal injury or damage tothe equipment, be sure that:• The leveling jacks are extended to the floor.• The full weight of the rack rests on the leveling jacks.• The stabilizing feet are attached to the rack, if it is asingle-rack installation.• The racks are coupled in multiple-rack installations.• Only one component is extended at a time. A rack maybecome unstable if more than one component is extendedfor any reason.

/ 3

Related manuals for HP TFT5600