HP L6017tm Installation Instructions Manual

Also see for L6015tm: Installation instructions Installation instructions Installation instructions User guide Installation instructions

Installation InstructionsHP Retail Integrated7-inch CFDCopyright © 2014 Hewlett-Packard Development Company, L.P. Theinformation contained herein is subject to change without notice.Printed inFirst Edition: January 2014*758427-B21*758427-B21NOTE: Refer to the HP L6015tm and L6017tm Retail Touch MonitorsUser Guide, the HP RP7 Retail System Model 7800 HardwareReference Guide, or the HP RP7 Retail System Model 7100 HardwareReference Guide at www.hp.com for detailed instructions oninstalling USB modules.Before Your BeginBefore installing the liquid-crystal display (LCD), be sure to power off thesystem and disconnect the power cord from the power outlet.WARNING! To avoid the risk of serious injury or damage to thesystem, ensure that the power cord is unplugged from the electricaloutlet at the wall before installing the LCD. Failure to do so mayexpose you to the risk of electric shock.NOTE: For regulatory and safety notices, refer to the ProductNotices included with your product.Configuring the LCDTo configure the LCD, refer to the HP Point of Sale Configuration Guide(available in English only). The guide is available on the HP factory imageof the RP7 system's hard drive and at www.hp.com. To access the guide onthe factory image:• In Windows XP or Windows Embedded POSReady 2009, select Start> All Programs > HP Point of Sale Information.• In Windows 7, Windows Embedded POSReady 7, Windows 8.x, orIndustry 8.1, select Start > HP Point of Sale Information.Check www.hp.com/support for updated software or documentation thatbecame available between the time your product was manufactured anddelivered to you.HP L6015tm and L6017tm Retail Touch MonitorsNOTE: Inserting the screws is arequired step.HP RP7 Retail System Model 7800NOTE: Inserting the screws is arequired step.RP7 7800RP7 7100L6015tmL6017tm

/ 2

Related manuals for HP L6015tm