HP Integrity rx1600 Deployment Manual

Also see for Integrity rx1600: Limited warranty Firmware update guide Limited warranty Cable Routing guide Installation guide

Contents

DescriptionThe hplpcfg utility enables or disables the EFI or BIOS boot setting on Emulex 2G or 4G FibreChannel Host Bus Adapter (FC HBA).Table 6-15 hplpcfg OptionsDescriptionOptionsSaves the HBA configuration to filename./se <filename>Loads the HBA configuration from filename./le <filename>FormatThe configuration file for EFI boot setting has the following format:[HBA0] ; section for each HBAWWID=11223344 ; read-only variableHostAdapterBiosEnable=1 ; input or current value when read from HBASelectBootEnable=1 ; input or current value when read from HBABootDeviceWWID=22334455 ; input or current value when read from HBABootDeviceLUN[0]=1111 ; input – default LUN; or current value when read from HBAThe text file can be edited to insert the WWID of the boot volume and the LUN number that theHBA will boot from. The tool discovers the WWID of the HBA and writes the information to thetext file. The text file will present the options in human readable format. The tool will updatethe hardware with the boot volume WWID and boot LUN read from the text file.ExamplesSSTK-v.3.2# ./hplpcfg /se h.iniSSTK-v.3.2# cat h.ini[HBA0]WWID=10000000c94ab9deHostAdapterBiosEnable=1SelectBootEnable=1BootDeviceWWID=50060e801439c901BootDeviceLUN[0]=1hpqlarepSynopsishpqlarep /s <filename> | /l <filename>DescriptionThe hpqlarep utility enables or disable the EFI or BIOS boot setting on QLogic 2G or 4G HBAs.Table 6-16 hpqlarep OptionsDescriptionOptionsSaves the HBA configuration to <filename>./s <filename>Loads the HBA configuration to <filename>./l <filename>FormatThe configuration file for EFI boot setting has one of the following formats:For 2G HBAs: [HBA0] ; section for each HBA - HBA NoWWID=11223344 ; read-only variable - HBA WWPNSelectiveLogin=1 ; input from customer - 1 (Enable) or 0 (Disable)EnableSelectiveLUN=1 ; input from customer - 1 (Enable) or 0 (Disable)BootDeviceWWNN=2000000000000000 ; input from customer - Boot DeviceNode name72 Utilities Reference