System AdministrationManaging Passwords15-19Managing PasswordsThe passwords associated with your NAC 800 installation are listed in thefollowing table:NAC 800passwordSet during Recovery processNAC 800Management orEnforcementserverInitial install process * See “Resetting the NAC 800 ServerPassword” on page 15-20.NAC 800 database Initial install process * See “Resetting the NAC 800 DatabasePassword” on page 15-21.NAC 800 userinterface,administratoraccountInitial install process * • For known passwords – NAC 800 Homewindow >> System configuration >> Useraccounts• For unknown passwords – See“Changing the NAC 800 AdministratorPassword” on page 15-21.endpoint / domainadministratorManually entered on the endpoint by theend-user.If the end-user has not defined a login/password combination, the default login isusually “administrator” with a blankpassword.Known passwords are entered on theSystemconfiguration>>Windows>>Agentlesscredentials window to allow NAC 800 to testthe endpoint.Password recovery on endpoints is beyondthe scope of this document.Windows domain Manually entered after installation on theSystemconfiguration>>Quarantining>>802.1XQuarantine method radio button window.Windows domain password recovery isbeyond the scope of this document.OpenLDAP Manually entered after installation on theSystemconfiguration>>Quarantining>>802.1XQuarantine method radio button window.OpenLDAP password recovery is beyondthe scope of this document.Table 15-2. NAC 800 Passwords
