Signal OutputINET configuration89Figure 5•11 shows resulting displays.INET-HP 5890Signal DefinitionACTUAL SETPOINTGLOBAL ADDR: 8,31ACTUAL SETPOINTSIG 2 OFFACTUAL SETPOINTSIG 1 ON FULL RANGEACTUAL SETPOINTSIG 1 ON RANGEDINET Signal Definition DisplaysFigure 5-11From the displays, the following may be noted:C HP 5890 signal channels are designated SIG 1 or SIG 2.C ON indicates the given signal channel is considered active by thecontroller; data from this signal channel is transmitted to otherdevices on the INET loop.Similarly, OFF indicates the channel is considered inactive; no datafrom this signal channel is transmitted to other devices on the loop.It is important to note that ON or OFF in this context are strictlyINET definitions, defined at the system controller. They do not, forexample, bear any relationship to whether or not a given detectorassigned to the signal channel is turned on or off.
