HP 54501A Programming Reference Manual

Also see for 54501A: Getting started guide Service manual Service manual Operation reference Service manual

DATADATA command/queryThe :WAVEFORM:DATA command causes the instrument to accept awaveform data record over the HP-IB and store it in the previouslyspecified waveform memory. The waveform memory is specified with aWAVEFORM:SOURCE command. Only waveform memories may havewaveform data sent to them.NoteThe format of the data being sent must match the formatpreviously specified by the waveforms preamble for thedestination memory.The DATA query tells the instrument to output the waveform recordstored in the waveform memory or channel buffer, previously specifiedwith a :WAVEFORM:SOURCE command, over the HP-IB.Command Syntax: :WAVe(orm:DATA < binary block data in # format >Example: OUTPUT 707;°:WAV:DATA'-Query Syntax: :WAVeform:DATA?Waveform Subsystem17-10HP 54501AProgramming