4 Move across to the BEEP command on the “commands” level.There are eight command choices available in the SYS MENU . Eachchoice on this level has a number prefix for easy identification (1: , 2: , etc.).6: BEEP5 Move down a level to the BEEP parameter choices.The first parameter choice is “ON” for the BEEP command (the beepersetting is stored in non-volatile memory and “ON” is the factory setting).ON6 Move across to the “OFF” choice.There are two parameter choices for BEEP.OFF7 Save the change and turn off the menu.The multimeter beeps and displays a message to show that the changeis now in effect. You are then exited from the menu.CHANGE SAVED>Auto/ManENTER∨> > >> >Chapter 2 Front-Panel Menu OperationA Front-Panel Menu Tutorial32
