HP 1200 series Basic Manual

26 Chapter 5—Use the fax featuresHP Fax 1200 Series• If the displayed number is correct, press ENTER to add it to the group.• To select a different number, press or until the appropriate numberappears, and then press ENTER to select it.7 After Add Another appears, press 1 for Yes if you want to add another individualnumber to the group or press 2 for No.8 After you are done selecting individual numbers and you press 2 for No, enter aname for the group.For more information, see “Enter text.”9 Press ENTER to save the group.10 After Add Another appears, press 1 for Yes if you want to create another group orpress 2 for No to exit.$GG RU UHPRYH UHLSLHQWV IURP JURXSVYou can add or remove an individual number to or from an existing group.1 Press Menu.2 Press 4, press 2, and then press ENTER.3 After 1=New 2=Edit appears, press 2.4 Press until the group that you want to edit appears, and then press ENTER.The first individual speed-dial entry in that group appears.5 For each entry in the group, press 1 to delete it or 2 to keep it.6 After Add Another appears, choose one of the following:• If you want to add new individual entries to the group, press 1 and see “Creategroup speed-dial settings.”• If you do not want to add any additional individual numbers, press 2 to edit thegroup name, or press ENTER to save it as is.'HOHWH VSHHGGLDO VHWWLQJVFollow these steps to delete an individual or group speed-dial entry.1 Press Menu.2 Press 4, and then press 3.3 Press until the individual or group entry that you want to delete appears, andthen press ENTER.8VH (UURU &RUUHWLRQ 0RGH ?(&0@ECM eliminates data lost due to poor phone lines by detecting errors that occur duringtransmission and automatically requesting retransmission of the erroneous portion.Phone charges are unaffected, or may even be reduced, on good phone lines. On poorphone lines, ECM increases sending time and phone charges, but sends the data much