HP 10GbE Pass-Thru Module User Manual

Also see for 10GbE Pass-Thru Module: Quickspecs

Installing the pass-thru module 9Installing the pass-thru moduleManually configuring the pass-thru moduleConfigure the pass-thru module manually using a CLI. See "Accessing the pass-thru module ("Accessingthe pass-thru module CLI" on page 10)" for more information.Module securityThe 10GbE Pass-Thru Module does not provide network security. You must provide security for the modulefrom somewhere else on the network.Installing the moduleCAUTION: Do not attach the pass-thru module cables until after configuration.IMPORTANT: Make sure that the server NIC configuration matches the pass-thru module bayselected.1. If a blank is installed in the bay, open the handle (1) and pull the blank out of the bay (2).2. Open the handle on the pass-thru module.3. Insert the pass-thru module into the bay (1).Get other manuals https://www.bkmanuals.com