HP 10GbE Pass-Thru Module Quickspecs

Also see for 10GbE Pass-Thru Module: User guide

Contents

The HP 10GbE Pass-Thru Module is designed for c-Class BladeSystem and HP Integrity Superdome 2 customers requiring a non-blocking, one -to-one connection between each server and the network. The pass-thru module provides 16 uplink ports that acceptboth SFP and SFP+ connectors.The HP 10GbE Pass-Thru Module can support 1Gb and 10Gb connections on a port by port basis. Optical as well as Direct Attach Copper(DAC) cables are also supported. Both standard Ethernet as well as Converged Enhanced Ethernet (CEE) traffic to an FCoE capableswitch is possible when using the appropriate NIC or adapter module.HP 10GbE Pass-Thru Module1. UID LED 4. Reset Button2. Health LED 5. Mini USB RS-232 management port3. Ethernet port link status and speed LEDs 6. Uplinks ports that accept SFP and SFP+ transceiver modulesand Direct Attach Cables (DAC)What's NewSupport for HP ProLiant G7 serversSupport for Converged Network AdaptersAt A GlancePerformance:16 direct server to network connectionsAuto-sense 1Gb or 10Gb operation on a port by port basisSupports standard Ethernet as well as Converged Enhanced EthernetSupports all NICs and mezzanine adapters including Flex AdaptersManagement:No management requiredModule performance monitored by the On-Board AdministratorFront panel or OA access for service and test and firmware updatesQuickSpecs HP 10GbE Pass-Thru ModuleOverviewDA - 13508 North America — Version 8 — August 17, 2012 Page 1