Menu
HAMPTON BAY H200 Owners & Installation Manual
Also see for H200: Brochure & specsOwners & installation manualOwners & installation manual
                                | |
Contents
| 
Hampton H200 Cast Freestanding Woodstove4This is a copy of the label that accompanieseach Hampton H200 Freestanding Woodstove.We have printed a copy of the contents herefor your review.SAFETY LABELNOTE: Hampton units are constantly beingimproved. Check the label on the unit and ifthere is a difference, the label on the unit is thecorrect one.HOT WHILE IN OPERATION DO NOT TOUCH. KEEP CHILDREN,CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSESKIN BURNS. READ NAMEPLATE AND INSTRUCTIONS.DO NOT REMOVE THIS LABEL290CERTIFIED TO COMPLY WITH JULY 1990PARTICULATE EMISSION STANDARDS.UNITED STATES ENVIRONMENTALPROTECTION AGENCYMADE IN CANADACAUTION918-428LISTED SPACE HEATER, SOLID FUEL TYPE, ALSOSUITABLE FOR MOBILE HOME INSTALLATIONMODEL: HAMPTON CAST FREESTANDING WOOD STOVE - H200TESTED TO: UL 1482 / ULC S627 REPORT NO: 219-S-09-2MINIMUM CLEARANCES TOCOMBUSTIBLE MATERIALSRESIDENTIAL INSTALLATION USINGSINGLE WALL CONNECTORSIDEWALL A 431 mm / 17 in D 737 mm / 29 inBACKWALL B 381 mm / 15 in E 435 mm / 17-1/8 inCORNER C 330 mm / 13 in F 505 mm / 19-7/8 inINSTALLATION USING LISTED DOUBLE WALLCONNECTOR - ALCOVEINSTALLATION USING LISTED DOUBLE WALLCONNECTOR - MOBILE HOMESIDEWALL A 381 mm / 15 in D 686 mm / 27 inBACKWALL B 254 mm / 10 in E 308 mm / 12-1/8 inCORNER C 228 mm / 9 in F 403 mm / 15-7/8 inSIDEWALL A 381 mm / 15 in D 686 mm / 27 inBACKWALL B 254 mm / 10 in E 308 mm / 12-1/8 inCORNER C 228 mm / 9 in F 403 mm / 15-7/8 inINSTALLATION USING LISTED DOUBLE WALLCONNECTOR - RESIDENTIAL CLOSE CLEARANCEMINIMUM ALCOVE CEILING HEIGHT: 1.5 M / 5 FT MAXIMUM ALCOVE DEPTH 1220 MM / 48 IN.MINIMUM CLEARANCES FOR HORIZONTAL CONNECTOR TO CEILING: 457 MM / 18"THE SPACE BENEATH THE HEATER MUST NOT BE OBSTRUCTED. OPERATE ONLY WITH FIREBRICKS IN PLACE.FLOORPROTECTION*INSTALL AND USE ONLY IN ACCORDANCE WITH THE MANUFACTURER'S INSTALLATION AND OPERATING INSTRUCTIONS.CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION IN YOUR AREA.USE 150 MM (6 IN.) DIAMETER MINIMUM 24 MSG BLACK OR 26 MSG BLUED STEEL CONNECTOR WITH LISTED UL103HT FACTORY-BUILT CHIMNEY SUITABLE FOR USE WITH SOLID FUELS OR MASONRY CHIMNEY.SEE LOCAL BUILDING CODE AND MANUFACTURER'S INSTRUCTIONS FOR PRECAUTIONS REQUIRED FOR PASSING ACHIMNEY THROUGH A COMBUSTIBLE WALL OR CEILING. DO NOT PASS CHIMNEY CONNECTOR THROUGH COMBUSTIBLEWALL OR CEILING. DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.FOR USE WITH SOLID WOOD FUEL ONLY. USE OF OTHER FUELS MAY DAMAGE HEATER AND CREATE A HAZARDOUS CONDITION. DO NOT OBSTRUCTCOMBUSTION AIR OPENINGS. OPERATE ONLY WITH FIREBRICKS IN PLACE. OPERATE ONLY WITH DOOR CLOSED - OPEN FEED DOOR TO FEED FIRE ONLY.DO NOT USE GRATE OR ELEVATE FIRE. BUILD WOOD FIRE DIRECTLY ON HEARTH. DO NOT OVERFIRE - IF HEATER OR CHIMNEY CONNECTOR GLOWS YOUARE OVERFIRING. INSPECT AND CLEAN CHIMNEY AND CONNECTOR FREQUENTLY. UNDER CERTAIN CONDITIONS OF USE CREOSOTE BUILDUP MAY OCCURRAPIDLY. KEEP FURNISHINGS AND OTHER COMBUSTIBLE MATERIAL AWAY FROM HEATER. REPLACE GLASS ONLY WITH NEOCERAM GLASS.COMBUSTIBLE FLOOR MUST BE PROTECTED BY NON-COMBUSTIBLE MATERIAL EXTENDING BENEATH THE HEATER AND TO THE FRONT AND SIDES ASINDICATED OR TO THE NEAREST PERMITTED COMBUSTIBLE MATERIAL.OPTIONAL COMPONENT: FAN (846-515), ELECTRICAL RATING: VOLTS 115, 60 HZ, 2 AMPSDANGER: RISK OF ELECTRIC SHOCK. DISCONNECT POWER BEFORE SERVICING UNIT. DO NOT ROUTE POWER CORD UNDER OR IN FRONT OF APPLIANCE.COMPONENTS REQUIRED FOR MOBILE HOME INSTALLATION: OUTSIDE AIR KIT AND ONE OF THE FOLLOWING DOUBLE WALL CONNECTORIN CANADA: LISTED SECURITY MODEL DP, OR OLIVER MACLEOD PRO-VENT PV DOUBLE WALLED CONNECTOR WITH LISTED CHIMNEY SYSTEM:SECURITY MODEL S2100, ICC EXCEL 2100, SUPER VENT 2100, SUPERPRO 2100, CF SENTINAL.IN USA: LISTED DOUBLE WALL CONNECTORS SECURITY MODEL DP, SELKIRK MODEL DS, OLIVER MACLEOD PRO VENT PV, SIMPSON DURA VENT MODELDVL, GSW SUPER PIPE 6, METAL-FAB DOUBLE WALL. CONNECTED TO ONE OF THE FOLLOWING COMPATIBLE CHIMNEY SYSTEMS SECURITY MODELS2100 OR MODEL ASHT, SELKIRK MODEL SSII, OLIVER MACLEOD PRO JET 3103, SIMPSON DURA PLUS, GSW MODEL SC OR METAL-FAB TEMP/GUARD,AMERI-TECHS, ICC EXCEL 2100, SIMPSON DURA PLUS HTC . USE CHIMNEY COMPONENTS AS SPECIFIED IN INSTALLATION INSTRUCTIONS.MEASURE FLUEFROM HEATER CENTER-LINEMANUFACTURED BY:FPI FIREPLACE PRODUCTS INTERNATIONAL LTD.6988 VENTURE ST.DELTA, BC V4G 1H4SIDEWALL G 381 mm / 15 in I 686 mm / 27 inBACKWALL H 330 mm / 13 in J 384 mm / 15-1/8 in290* In Canada, floor protection must extend18" (457mm) to the front and 8" (200mm)to each side and back of the stove.K 457 mm / 18 inL 150 mm / 6 inM 150 mm / 6 inSIDESIDEFRONTKMLBACKODECNOVOCTSEPTAUGJULJUNMAYAPRMARFEBJANDATE OF MANUFACTURE2005 2006 2007SAFETY LABEL FOR H200 |
Related manuals for HAMPTON BAY H200
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved