www.gateway.com17Connecting to a broadbandmodem or networkYou can connect your computer to a broadband (cable or DSL)modem or to a wired Ethernet network.To connect to a broadband modem or to an Ethernetnetwork:1 Insert one end of the network cable into the networkjack on the back of your computer.2 Insert the other end of the network cable into a cablemodem, DSL modem, or network jack.Connecting a dial-up modemYour computer may have a 56K modem that you can use witha standard telephone line to connect to the Internet or to faxdocuments.To connect the modem:1 Insert one end of the modem cable into the modemjack on the modem at the back of your computer.2 Insert the other end of the modem cable into a telephonewall jack. (The modem will not work with digital or PBXtelephone lines.)3 If you want, connect a telephone to the PHONE jack onthe modem at the back of your computer.ImportantYour computer has a built-in Ethernet (network) jack. For informationabout setting up a wired or wireless Ethernet network, see your online UserGuide.WarningTo reduce the risk of fire, use only No. 26 AWG or largertelecommunications line cord.
