www.gateway.com91Recovering pre-installed software and driversAs a troubleshooting step, you may need to reinstall thesoftware and device drivers that came pre-installed on yourcomputer from the factory. You can recover using either yourhard drive or the backup discs you have created.• New software—If you need to recover software that didnot come pre-installed on your computer, you need tofollow that software’s installation instructions.• New device drivers—If you need to recover devicedrivers that did not come pre-installed on yourcomputer, follow the instructions for updating drivers in“Checking for device problems” on page 87.To recover your pre-installed software and drivers:1 Click (Start), All Programs, Gateway, then clickGateway Recovery Management. Gateway RecoveryManagement opens.- OR -If you are recovering from your driver and applicationrecovery disc, insert it into the disc drive, then go toStep 3 after the Gateway Application Recovery mainmenu opens.2 Click the Restore tab, then click Reinstallapplications/drivers. The Gateway ApplicationRecovery main menu opens.
