Managing Applications3.3Chapter 3 Managing ApplicationsTo display the last-selected category of applications:1. Tap the Applications Launcher (Home) icon; then tap the Menu icon.2. From the Options menu, tap Preferences.3. In the Preferences dialog box, tap the box next to Remember Last Category.4. Tap OK. Each time you return to the Applications Launcher, the handheld displays the last category of applicationsyou selected.NOTE: If you do not select the Remember Last Category option, “All” applications display when you select theApplications Launcher.Setting Preferences for ApplicationsYou can set preferences for individual applications in the Preferences dialog box. Not all applications have preference settings.To set preferences for an application:1. Open an application. For instructions, see “Selecting Applications” earlier in this chapter.2. Tap the Menu icon.3. From the Options menu, select Preferences.4. Enter the desired preference settings; then tap OK.Assigning Applications to ButtonsButtons preferences let you assign different applications to the buttons on the front of the handheld, and to the HotSync® buttonon the cradle. For example, if you find that you seldom use the To Do List and often use the Memo Pad, you can assign the To DoList button to start the Memo Pad application.You can also change whether the full-screen pen stroke activates the Graffiti® 2 Help application or one of your handheldcontrols using Buttons preferences.If you assign a different application to a button, you can still select the original application using the Applications Launcher.Changes made in the Buttons Preferences screen or HotSync Buttons dialog box take effect immediately.To change the Buttons preferences:1. Tap the Applications Launcher (Home) icon.2. Select All or System from the pick list in the upper right corner.3. Select Prefs from the menu.4. In the pick list in the upper right corner, tap Buttons.5. In the Buttons Preferences screen, tap the pick list next to the button you wantto re-assign.6. Tap the application that you want to assign to the button.TIP: To restore all of the buttons to their factory settings, tap Default.
