1.2 Chapter 1 IntroductioniQUE® COMPONENTSPower/Backlight ButtoniQue ScreenText Input AreaApplication ButtonsScroll ButtonsApplication ButtonsBattery iconLocating Front Panel Controls• Power/Backlight Button: Pressing the power button turns the handheld on or off and returns to the last screen that wasdisplayed when turned on. The green LED is lit when the unit is charging or using external power. Use the backlight toilluminate the screen in low-light conditions. Press and hold the power button for about two seconds to turn the backlighton or off. You may also assign the full-screen pen stroke to activate the backlight. For more information, see “To changewhat the full-screen pen stroke activates” in Chapter 3.• Battery Icon: Displays battery level or a lightning bolt symbol to indicate when the iQue battery is charging.• iQue Screen: Displays the applications and data stored in your handheld. It is touch-sensitive and stylus-sensitive.• Text Input Area: Write letters and numbers in this area using the Graffiti® 2 alphabet. Chapter 2 explains how to enter datausing Graffiti 2 characters.• Application Buttons: Activate the individual handheld applications that correspond to the icons marked on the buttons:Date Book, Address Book, To Do List, and Que Applications. See “Assigning Applications to Buttons” in Chapter 3 for detailson reassigning these buttons to other applications on your handheld. If your handheld is turned off, pressing any of theapplication buttons turns on the handheld and opens the corresponding application.• Scroll Buttons: Displays text and other information that extends beyond of the area of the handheld screen. Press thelower half of the scroll button to scroll down and view information below the viewing area. Press the upper half to viewinformation above the viewing area.Introduction: iQue Components
