10.2 Chapter 10 Setting Connection and Network PreferencesSetting Modem ConfigurationsModem configurations let your iQue® handheld use a connected modem to communicate with remote devices, such as your ISPor dial-in server, to access a remote computer.You must set Network preferences, in addition to configuring Modem settings, to be able to use TCP/IP software included in thehandheld operating system to connect to remote devices.To set Serial to Modem preferences:1. Tap the Applications Launcher (Home) icon, then tap the Prefs application.2. In the pick list in the upper right corner of the screen, tap Connection.3. In the Connection Panel select Standard Modem and tap Edit. The name of the current configuration appears at thetop of the screen.4. Tap the Connect to: pick list and select the device to connect to.5. Tap the Via: pick list and select the type of connection.6. In the Dialing pick list, tap TouchTone or Rotary. Select Rotary only if your telephone service does not supportTouchTone dialing.7. Tap the Volume pick list and select the speaker volume for the modem.8. Tap the Details button at the bottom of the screen for the following additional settings:• Tap the Speed pick list and select the maximum speed for your modem to communicate with your handheld. (Thissetting does not control the speed at which your modem communicates with your telephone service.)• Tap the Flow Control (Flow Ctl) pick list, and select Automatic, On (Xon), or Off (Xoff) flow control for themodem connection.• If necessary, edit the Init String text to change the modem setup string.9. Tap OK through each screen until you are returned to the Connection Preferences screen.Setting Connection Preferences
