64ENTER. Use the ROCKER KEYPAD to highlight the desired setting and press ENTER.5. For GARMIN DGPS or RTCM In/NMEA Out, use the ROCKER KEYPAD to highlight‘Beacon’ and press ENTER. Use the ROCKER KEYPAD to select ‘Scan’ or ‘Manual’and press ENTER. If ‘Scan’ is selected, the GPS V will automatically direct the beaconreceiver to scan for available beacon transmitters. If ‘Manual’ is selected, select the‘Freq’ and ‘Bit Rate’ fi elds and enter the appropriate settings. The beacon status,signal-to-noise ratio and distance to beacon are displayed on the bottom of the page.Main Menu: AccessoriesThere are six accessory pages (features which enhance unit operation, but are notessential). The Accessories Page displays icons which you select to view the desiredaccessory.To select an accessory:1. Follow the steps on page 50 to select ‘Accessories’.2. Use the ROCKER KEYPAD to highlight the desired accessory icon and pressENTER.Sun & Moon Sun/Moon Location, Sunrise, Sunset, Moonrise, MoonsetHunt & Fish Prediction, Best Times, Good TimesCalendar Monthly Calendar, NotesGas Mileage Mileage Calculations based on Odometer/Fuel PurchaseGames Breakout Game and Memory RaceCalculatorMain Menu: Accessories: Sun & MoonAccessories:Sun & MoonHunt & FishCalendarGas MileageGamesCalculatorMain Menu: AccessoriesAccessories PageReference