Selecting a GOTO DestinationThe GPS 12XL provides four ways to navigate to adestination: GOTO, MOB, TracBack, and route naviga-tion. The most basic method of selecting a destinationis the GOTO function, which lets you choose anystored waypoint as the destination and quickly sets adirect course from your present position.To activate the GOTO function:1. Press G.2. Select the waypoint you want to navigate to, andpress E.Once a GOTO waypoint has been activated, theCompass Page or Highway Page will provide steeringguidance to the destination until either the GOTO iscancelled or the unit has resumed navigating the activeroute (see pg 30).To cancel an active GOTO:1. Press the G key.2. Highlight ‘CANCEL GOTO?’, and press E.Man Overboard FunctionThe GPS 12XL’s man overboard function (MOB) letsyou simultaneously mark and set a course to a positionfor quick response to passing positions.To activate the MOB mode:1. Press G twice. The GOTO waypoint page willappear with ‘MOB’ selected.2 Press E to begin MOB navigation.The GPS 12XL will now guide you to the MOBwaypoint until the MOB GOTO is cancelled. If youwant to save the MOB waypoint, be sure to rename itbecause it will be overwritten the next time a MOB isactivated.23Select a destination way-point from the GOTOwaypoint list.REFERENCESelect a GOTO& MOBFunctionOnce the MOB mode hasbeen activated, steeringguidance will be providedby the Compass orHighway Page. Activatinganother MOB will over-write the previous MOBwaypoint.