Garmin GPS 120XL Owner's Manual

Also see for GPS 120XL: Quick reference guide Quick reference guide

Contents

Garmin GPS 120XL Owner's Manual Manual pdf 60 page image

InstallationAPPENDIX A56Mounting the GPS 120XLThe GARMIN GPS 120XL’s compact case is suitablefor mounting in exposed locations or at the nav station.The unit comes with a gimbal bracket that can be usedfor surface, overhead, or flush mounting. When choos-ing a location for the display unit, make sure you con-sider the following conditions:• There should be at least 2.00” (5.0 cm) clearancebehind the case to allow connection of the anten-na and power/data cables.• The mounting surface should be rigid enough tosupport the unit and protect it from excessivevibration and shock.To surface mount the GPS 120XL:1. Place the mounting bracket in the desired location.2. Mark and drill the four mounting holes for the fasten-ers you are using.3. Fasten the bracket to the surface using the appropri-ate fasteners.4. Insert the GPS 120XL into the mounting bracket.5. Screw the two mounting knobs through the bracketand into the GPS 120XL.6. Connect the power/data and antenna cables to theback of the unit, making sure the locking rings arefully tightened on both connectors.