Garmin GNS 420AW Quick Reference Manual

Also see for 400W Series: Supplemental Flight manual Pilot's guide addendum Manual supplement Pilot's guide addendum Pilot's Guide & Reference

Contents

Garmin GNS 420AW Quick Reference Manual Manual pdf 12 page image

10 190-00356-01 Rev FMAP PAGEMap PageUser-selectableData FieldsMap DisplayPresentPositionMap ScaleThe follow- ing symbols areused to depict the various airports and navaids on the mappage:Airport with hard surface runway(s); Primary runway shownAirport with soft surface runway(s) onlyPrivate Airfield IntersectionVOR VORTACVOR/DME TACANDME NDBLocalizer Locator Outer MarkerHeliportTo Select a Map Scale1. Press the up arrow on the RNG key to zoom outto a larger map area.2. Press the down arrow on the RNG key to zoom into a smaller map areawith more detail.To Quickly Declutter theMap DisplayThe 400W series supportsfour levels of map decluttering.1. Press the CLR key momentarily to change theamount of map detail. The declutter level willappear adjacent to the map scale.2. Press the CLR key as needed to select the desiredamount of map detail.To Turn the Data FieldsOn/Off on the Right Sideof the Map1. With the mappage displayed,press MENU todisplay an options menu.2. Turn the large right knob to highlight“Data Fields Off?” and press the ENT key.3. To re-display the data fields, follow steps 1 and2, but instead select “Data Fields On?” from theoptions menu.To Select a Different Data Item for any Data Field:1. With the map page displayed, press the MENU keyto display an options menu.2. Turn the large right knob to highlight “ChangeFields?” and then press ENT.3. Use the large right knob to highlight the datafield you wish to change.4. Turn the small right knob to display the list ofavailable data items. Continue turning the smallright knob to select the desired data item fromthe list.5. Press the ENT key to select the desired data itemand return to the map page.6. Press the small right knob momentarily to removethe cursor from the page.