A-3190-01150-02 Rev. J Garmin G500H Pilot’s GuideForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8Glossary Appendix AAppendix BIndexJeppesen DatabasesThe aviation database is updated on a 28 day cycle. Aviation database updatesare provided by Garmin and may be downloaded from the Garmin web site“fly.garmin.com” onto a Garmin provided Supplemental data card. ContactGarmin at fly.garmin.com for navigation database updates and update kits. Theaviation database is stored internally and the data card is only used to transferthe database into the unit.The optional ChartView database is updated on a 14 day cycle. The ChartViewdatabase is provided directly from Jeppesen. ChartView is an optional featurethat requires enablement by a Garmin dealer. Contact Jeppesen (www.jeppesen.com) for ChartView subscription and update information.Updating the Jeppesen Aviation Database1) With the G500H System OFF, insert the SD card containing the aviationdatabase update into the upper card slot of the GDU 620 to be updated (labelof SD card should face up).2) Turn the G500H System ON.3) Verify the correct update cycle is loaded during power-up. Press the ENT key tocontinue or the CLR key to cancel loading.Figure A-1 Database Initialization Display
