4-36Garmin G500H Pilot’s Guide 190-01150-02 Rev. JForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8GlossaryAppendix AAppendix BIndexSwitching Between TIS Operating Modes1) Turn the large MFD knob to the MAP page group and then turn the small MFDknob to the Traffic Map Page.2) Select the STANDBY or OPERATE soft key to switch between modes. The modeis displayed in the upper left corner of the Traffic Map Page.OR1) Press the MENU key.2) Select Operate mode or Standby mode whether airborne or on the ground.3) Press the ENT key.NOTE: An alert will be generated when Standby is selected and the aircraftis in the air.The annunciations indicate the status of traffic information appear in a bannerat the lower left corner of maps on which traffic can be displayed.Traffic StatusBannerAnnunciationDescriptionTA OFF SCALE*A Traffic Advisory is outside the selected display rangeAnnunciation is removed when traffic comes within the selecteddisplay rangeTA/ X.XNM/± XX↕**System cannot determine bearing of Traffic AdvisoryAnnunciation indicates distance in NM, altitude separationin hundreds of feet, and altitude trend arrow (climbing/descending)AGE MM:SSAppears if traffic data is not refreshed within 6 secondsIf after another 6 seconds data is not received, traffic is removedfrom the displayThe quality of displayed traffic information is reduced as the ageincreasesTRFC COASTThe displayed data is not current (6 to 12 seconds since lastmessage)The quality of displayed traffic information is reduced when thismessage is displayed
