3-72Garmin G500H Pilot’s Guide 190-01150-02 Rev. JForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8GlossaryAppendix AAppendix BIndexIdent/Facility/City SelectionThe current destination Identifier, Facility Type with icon, Facility Name, andCity (location) are shown in the top window of the Flight Plan mode WaypointInformation page. The default is the Nearest airport if there is no active flight plan.New Identifiers may also be selected as shown in section 3.5.3.3.CityFacility NameIdentifier Access (Public/Private andSymbol)Figure 3-104 Flight Plan Ident/Facility/City Detail1) While viewing the Waypoint Information page of the FPL page group, pressthe RWY/FREQ, APT DIR, or WX soft keys to view information about thewaypoint.2) The current destination Ident, Facility, and City is shown, but may be changedto find information about other choices. Press the small MFD knob to activatethe cursor. These fields may not be selected if the RWY, APT DIR, or WX pagesare selected. If viewing those pages, press the soft key for that page again toreturn to the Waypoint Information page.3) Use the large MFD knob to highlight the field you wish to change and use thesmall MFD knob to change the value.4) Press the ENT key to save the selected value or press the small MFD knob tocancel editing.
