Garmin 010-11018-00 - Mobile PC - GPS Software Quick Start Manual

Also see for 010-11018-00 - Mobile PC - GPS Software: Technical specifications Quick start manual Declaration of conformity

Contents

Garmin 010-11018-00 - Mobile PC - GPS Software Quick Start Manual Manual pdf 4 page image

Garmin Mobile PC with Wireless GPS Receiver Quick Start Manual➊ Install the Battery1. Locate the black or gray lithium-ion battery thatcame in the product box.2. With your thumbnail, slide the battery cover releasetab toward the end of the GPS 10x.3. Pull the battery cover off.4. Locate the metal contacts on the end of the battery.Insert the battery so the metal contacts on thebattery match up with the ontacts inside the batterycompartment. Press the battery down into place.5. Replace the battery cover by inserting the tabs intothe notches. Press the battery cover closed; therelease tab locks the cover in place.ReleasetabBattery coverLithium-ion batteryWaRNiNG: This product contains a lithium-ion battery. Toprevent damage, remove the unit from the vehicle when exitingor store it out of direct sunlight.Replacement BatteryIf you need to replace the battery, use a Garmin 3.7Volt lithium-ion battery pack (010-10840-00). Purchasea replacement battery at http://buy.garmin.com. Youcan also use a compatible cell phone battery, such as aNokia BL-5C.➋ Charge the GPS 10x Receiver1. Plug the small end of the power cable into the mini-USB connector on the end of the GPS 10x.2. Plug the other end of the power cable into anavailable power outlet in your vehicle.You can use the GPS 10x receiver while you arecharging it. It takes about four hours to charge thebattery. A fully charged battery lasts about 22 hours.➌ Install Garmin Mobile® PC onYour LaptopGarmin Mobile PC is compatible with Windows ® 2000SP2, XP, and Windows Vista® operating systems.