Gardena A 1020 Sensor Operating Instructions Manual

Also see for A 1020 Sensor: Operating instructions User manual

Contents

Gardena A 1020 Sensor Operating Instructions Manual Manual pdf 4 page image

4GBInsert battery intoWater Timer :Control panel of theWater Timer :Connect adapter cable ofthe Soil Moisture Sensor :If the batteries are flat and are not replaced, the connectedWater Timer will function with the watering programme selected.v Replace batteries (see 7. Maintenance“Replace batteries ofSoil Moisture Sensor ” ).With the GARDENA Automatic Irrigation Set you can take soilmoisture into account for controlled watering. The watering timeand the watering duration can be set individually.6 Run Time Used to set the watering duration.button :7 Frequency Used to set the watering cycle.button :8 Light Sensor : day / night recognition (dependent on thelighting conditions).9 Error LED : Indicates that the battery is almost emptyor that the Soil Moisture Sensor is notconnected or not properly connected.If the battery is almost empty the programme is not activated anymore. The valve cannot be opened manually any more.v Replace battery (see 7. Maintenance“Replace battery of theWater Timer” ).4. Initial OperationWater Timer :v For inserting the battery, please see 7. Maintenance“Replacebattery of the Water Timer” ).1. Press unlock button 1 andremove control panel 2 fromthe Water Timer.2. Insert short adapter cable insensor connection 3.3. Plug control panel 2 onto theWater Timer again.376 89121835-28.960.02_12.03.2007.qxd 15.03.2007 15:37 Seite 4