26FunctionsAuto Harmony Type SelectionMaster TuneWhen the HARMONY button is enga-ged, a single note on the right-handsection of the keyboard will be heardwith additional auto harmony noteswhen the auto accompaniment isplaying. There are four types of harmo-nies that can be selected.Duet adds a harmonizing note soun-ding below the single right-hand notethat you supply when the chord accom-paniment is playing.Close harmony adds two harmonizingnotes sounding below the single right-hand melody note that you supplywhen the chord accompaniment isplaying.Open harmony adds several harmoni-zing notes when the chord accompani-ment is playing.Octave adds a note one octave belowthe note in the right-hand section of thekeyboard when the chord accompani-ment is playing.1. Press the FUNCTION button, then the +/YES button to confirm.2. Press the PAGE UP or the PAGE DOWN buttons until the “Harmony Type” menu appears.3. Press the +/YES button to confirm your selection. The current harmony type will be shown.4. Use the +/YES or –/NO buttons to select a harmony type.5. Press the FUNCTION button again to exit the function setting mode.The pitch of the Symphony is automatically set to standard A440 pitch when the piano isturned on. The tuning feature makes it possible to tune the pitch of the instrument in fineintervals. Tuning can be accomplished over a range of +/–1 semitone in +/–64 steps.1. Press the FUNCTION button.2. Press the PAGE UP or the PAGE DOWN buttons until the “Master Tune” menu appears.3. Press the +/YES button to show the tuning value.4. Use the +/YES button to increase the value or the –/NO buttons to decrease the value.Press the +/YES, –/NO buttons simultaneously to recover the default setting of 00.5. Press the FUNCTION button again to exit the function setting mode.