Appendix DInstalling and replacing filtersReplacement and installationsequenceReplacement or installation of a filter is performed in the following sequence:1 Remove the filter module from the scanner.2 If replacing a filter, remove the filter to be replaced from the filter module.3 Install the new filter in the filter module.4 Place the filter module in the scanner.5 Register the filter change in the Typhoon FLA 7000.Remove the filter module fromthe scannerActionStepClick the Filter Module button in the main window.1The following status message appears.Wait until the message is closed before proceeding to the next step.108 Getting Started with Typhoon FLA 7000 28-9607-64 ADD Installing and replacing filters
