Appendix CPeriodic maintenanceCleaning the outside of TyphoonFLA 7000Clean the outside with a moist soft cloth and a mild detergent. Wipe afterwards with adry soft cloth.Maintenance of the SHG laserIf you use the SHG laser in the Typhoon FLA 7000, it will require periodical calibration.When the Typhoon FLA 7000 is switched on, it automatically executes calibration. Youdo not need to do a manual calibration if the Typhoon FLA 7000 is used at least once amonth.CAUTIONActivate the Typhoon FLA 7000 at least once every 30 days to exe-cute calibration. This calibration makes sure that the SHG laseroperates properly. Failure to calibrate the Typhoon FLA 7000 every30 days reduces the lifespan of the SHG laser.Operation procedures:1 Turn on the Typhoon FLA 7000 and the computer.2 Wait until warm-up and self-diagnosis is completed, and the scanner is ready. Onlythe power lamp on the upper left panel is lit. The automatic calibration has now beenperformed.3 Turn off the Typhoon FLA 7000 and the computer.Replacing the filters in theTyphoon FLA 7000See the instruction in Appendix D Installing and replacing filters, on page 108.Getting Started with Typhoon FLA 7000 28-9607-64 AD 107C Periodic maintenance
