GE PVM2070 Installation Instructions Manual

Also see for Profile Spacemaker PVM2070DM: Dimension Guide Owner's manual

GE PVM2070 Installation Instructions Manual Manual pdf 9 page image

9DETERMINING WALL PLATE LOCATION UNDER YOUR CABINETC.Your cabinets may have decorative trim that interfereswith the microwave installation. Remove the decorativetrim to install the microwave properly and to make itlevel.THE MICROWAVE MUST BE LEVEL.Use a level to make sure the cabinet bottom is level.If the cabinets have a front overhang only, with noback or side frame, install the mounting plate downthe same distance as the front overhang depth. Thiswill keep the microwave level.Measure the inside depth of the front overhang.Draw a horizontal line on the back wall an equaldistance below the cabinet bottom as the insidedepth of the front overhang.For this type of installation with front overhang only,align the mounting tabs with this horizontal line, nottouching the cabinet bottom as described in Step D.Plate position – beneath flat bottomcabinetPlate position – beneath recessed bottomcabinet with front overhangMounting Plate TabsTouching the Cabinet BottomMounting Plate withTabs Below CabinetBottom the SameDistance as the FrontOverhang DepthAt least 30″, up to 36″Plate position – beneath framed recessedcabinet bottomMounting Plate TabsTouching the BackFrameInstallation Instructions30″ to Cooktop30″ to Cooktop123