GE PVM1899 Installation Instructions Manual

Also see for PVM1899: Owner's manual

Contents

GE PVM1899 Installation Instructions Manual Manual pdf 8 page image

7Installation InstructionsInstall ApplianceRemoving the mounting plateNote: To avoid possible damage to the work surface or to thebottom of the appliance, cover the work surface.1. Remove any remaining contents from the microwave ovencavity.2. Remove the screws from the mounting plate.The mounting plate will be used as the rear wall templateand for mounting.3. Reinstall the screws into the holes where they were re-moved.Note: To avoid damage to the microwave oven, do not gripor use the door or door handle while the microwave oven isbeing handled.Finding the wall studsNote: The microwave must be connected to at least one wallstud. If no wall studs exist within the cabinet opening, do notinstall the microwave oven.1. Locate the edges of the wall studs within the cabinetopening by using:- a stud finder or- a hammer (tapping lightly across the mounting surface tofind a solid sound).2. Place a mark halfway between the edges and draw aline down the center of the studs (See possible wall studsconfiguration).Possible wall stud configurationsThese depictions show examples of preferred installationconfigurations with the mounting plate.Note: Care must be taken when drilling holes. Electrical wiresmay be concealed behind the wall covering and contact withthem could result in electrical shock.No wall studs at corner holesIf wall stud is within 6¼" (159 mm) of the vertical centerline,only Room Venting (recirculation) or Roof Venting installationscan be done.Wall stud at one corner holeWall studs at both corner holes