GE Monogram ZV48T Installation Instructions Manual

Also see for ZV30S: Installation instructions Installation instructions

Contents

GE Monogram ZV48T Installation Instructions Manual Manual pdf 4 page image

4Advance PlanningINSTALLATION CLEARANCESThese vent hoods are designed to be installed onto awall or beneath a soffit or cabinet.• Install these hoods* 30" Min. to 36" Max. above thecooking surface.*These hoods may be installed 24" min. above a gas orelectric drop-in style cooktop. Always observe the 30"to 36" clearance when installed over any professionalstyle cooktop or range.In this installation the ductwork running from the topof the hood will be concealed in the soffit or uppercabinetry.For this installation, a decorative duct cover isavailable to conceal the ductwork running fromthe top of the hood. Use of the duct cover requiresspecial consideration to the installation height abovethe countertop.Note: Clearances may vary due to type of cooking product andlocal codes. Check with local inspectors to be sure standard isapplicable.SOFFITSoffit Installation30" MIN.36" MAX.Wall Mount Installation30" MIN.36" MAX.OPTIONAL DUCT COVERACCESSORIESStandard and Full-Width decorative duct covers areavailable in 6" and 12" heights. Duct covers may bestacked, in various combinations, to conceal theductwork running from the top of the hood to theceiling.• Before you begin, you should determine theinstallation height of the hood and order the correctsize duct cover. The duct covers should be ordered atthe same time as the vent hood and be on site beforeinstallation. Order the duct cover corresponding toyour model.6" Duct CoversHood Model 6” Duct Cover DimensionsZV48T, ZV48S ZX48DC6 6"H x 19-11/16"W x 11-7/8"DZV36T, ZV36S ZX36DC6 6"H x 15-3/4"W x 11-7/8"DZV30T, ZV30S ZX36DC6 6"H x 15-3/4"W x 11-7/8"D12" Duct CoversHood Model 12” Duct Cover DimensionsZV48T, ZV48S ZX48DC12 12"H x 19-11/16"W x 11-7/8"DZV36T, ZV36S ZX36DC12 12"H x 15-3/4"W x 11-7/8"DZV30T, ZV30S ZX36DC12 12"H x 15-3/4"W x 11-7/8"D6" Duct Cover12" Duct CoverStandard Duct CoversOptional 6"or 12" DuctCoverFull-Width Duct Covers6" Duct CoversHood Model 6” Duct Cover DimensionsZV48S ZX48FWDC6 6"H x 47-15/16"W x 11-7/8"DZV36S ZX36FWDC6 6"H x 35-15/16"W x 11-7/8"DZV30S ZX30FWDC6 6"H x 29-15/16"W x 11-7/8"D12" Duct CoversHood Model 12” Duct Cover DimensionsZV48S ZX48FWDC12 12"H x 47-15/16"W x 11-7/8"DZV36S ZX36FWDC12 12"H x 35-15/16"W x 11-7/8"DZV30S ZX30FWDC12 12"H x 29-15/16"W x 11-7/8"D