GE JT91230 Owner's Manual

Also see for JT912: Technical service guide Installation instructions Installation instructions Owner's manual Owner's manual

Contents

GE JT91230 Owner's Manual Manual pdf 26 page image

26Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsConsumer SupportBefore You Call For Service…Troubleshooting TipsSave time and money! Review the charts on the followingpages first and you may not need to call for service.Problem Possible Causes What To DoControl signals after You forgot to enter a bake • Press the BAKE pad and desired temperature or theentering cooking time temperature or cleaning SELF CLEAN STD/LOW pad and desired clean time.or delay start time.Food does not bake Oven controls improperly set. • See the Using the oven section.or roast properly Shelf position is incorrect • See the Using the oven section.or the shelf is not level.Incorrect cookware or • See the Using the oven section.cookware of improper sizebeing used.Oven floor not in place. • Replace the oven floor.Oven thermostat needs • See the Adjust the oven thermostat—Do it yourself!adjustment. section.Food does not Oven controls improperly set. • Make sure you press the BROIL HI/LO pad.broil properly Improper shelf position • See the Broiling Guide.being used.Food being cooked • Use the broiling pan and grid that came with your oven.in a hot pan. Make sure it is cool.Cookware not suited • Use the broiling pan and grid that came with your oven.for broiling.The probe is plugged into the • Unplug and remove the probe from the oven.outlet in the oven.Aluminum foil used on the • See the Using the oven section.broiling pan and grid hasnot been fitted properly andslit as recommended.In some areas the power • Preheat the broil element for 10 minutes.(voltage) may be low. • Broil for the longest period of time recommended inthe Broiling Guide.Clock and timer A fuse in your home may be • Replace the fuse or reset the circuit breaker.do not work blown or the circuit breakertripped.Oven controls improperly set. • See the Using the clock, timer and control lockoutsection.Oven light does Light bulb is loose or defective. • Tighten or replace the bulb.not work Pad operating light is broken. • Call for service.