GE JNM7196SFSS Installation Instructions Manual

Also see for DVM7195: Use and care manual Installation instructions Owner's manual Owner's manual Owner's manual

GE JNM7196SFSS Installation Instructions Manual Manual pdf 9 page image

9DETERMINING WALL PLATE LOCATION UNDER YOUR CABINETCYour cabinets may have decorative trim that interfereswith the oven installation. Remove the decorative trimto install the oven properly and to make it level.7+(29(10867%(/(9(/Use a level to make sure the cabinet bottom is level.If the cabinets have a front overhang only, with no backor side frame, install the mounting plate down the samedistance as the front overhang depth. This will keepthe oven level.Measure the inside depth of the front overhang.Draw a horizontal line on the back wall an equaldistance below the cabinet bottom as the inside depthof the front overhang.For this type of installation with front overhang only,align the mounting tabs with this horizontal line, nottouching the cabinet bottom as described in Step D.3ODWHSRVLWLRQ²EHQHDWKIODWERWWRPFDELQHW3ODWHSRVLWLRQ²EHQHDWKUHFHVVHGERWWRPFDELQHWZLWKIURQWRYHUKDQJMounting Plate TabsTouching the CabinetBottomMounting Platewith Tabs BelowCabinet Bottomthe Same Distanceas the FrontOverhang DepthAt least 30s, up to 36s3ODWHSRVLWLRQ²EHQHDWKIUDPHGUHFHVVHGFDELQHWERWWRPMounting Plate TabsTouching the BackFrameInstallation Instructions30s to Cooktop30s to Cooktop123