0key Tone - You may set the key tone to “On” or “Off” when youpress buttons. Press the CID/VOL ( + or - ) button to scroll to Onor Off, then press MENU button to save the setting. The defaultsetting is On.Auto TalkThis option allows you to pick up the handset from base to answeran incoming call without pressing the TALk/END button.From the Setup HS Menu:1. Press the CID/VOL ( + or - ) button to scroll to the Auto Talk sub-menu.. Press MENU button to enter the menu. Use the CID/VOL ( + or- ) button to scroll to your selection. The default setting is On.. Press the MENU button to save your selection.Handset NameFrom the Setup HS Menu:1. Press the CID/VOL ( + or - ) button to scroll to the Handsetname sub-menu.. Press MENU button to enter the menu. The default setting isHandset.. Use the touch-tone pad to enter a name (up to 1 characters).More than one letter is stored in each of the number keys. Forexample, to enter Bill Smith, press the key twice for the letterB. Press the key times for the letter I. Press the 5 key timesfor the letter L. Press the 5 key times for the second letterL, and press the 1 key to insert a space between the first andlast name. Press the 7 key times for the letter S; press the 6key once for the letter M; press the key times for the letterI; press the 8 key for the letter T; press the key twice for theletter H.
