GE 27913 User Manual

GE 27913 User Manual Manual pdf 1 page image

Model 27918DECT 6.0Optional/AdditionalCordlessHandsetGuideThomson Inc.101 West 103rd StreetIndianapolis, IN 46290-1102© 2007 Thomson Inc.Trademark(s) ® RegisteredMarca(s) Registrada(s)Model 2791800021831 (Rev. 0 Dom E/S)07-27Printed in ChinaInterference InformationThis device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference; and (2) This devicemust accept any interference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occurin a particular installation.Privacy of Communications may not be ensured when using this product.If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:• Reorient or relocate the receiving antenna (that is, the antenna for radio or televisionthat is “receiving” the interference).• Reorient or relocate and increase the separation between the telecommunicationsequipment and receiving antenna.• Connect the telecommunications equipment into an outlet on a circuit different fromthat to which the receiving antenna is connected.If these measures do not eliminate the interference, please consult your dealer or anexperienced radio/television technician for additional suggestions. Also, the FederalCommunications Commission has prepared a helpful booklet, “How To Identify andResolve Radio/TV Interference Problems.” This booklet is available from the U.S.Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies.Notice: The changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.Hearing Aid Compatibility (HAC)This telephone system meets FCC standards for Hearing Aid Compatibility.LicensingLicensed under US Patent 6,427,009.FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operated witha minimum distance of 20 centimeters between the radiator and your body. Thistransmitter must not be co-located or operated in conjunction with any other antenna ortransmitter.”For body worn operation, this phone has been tested and meets the FCC RF exposureguidelines when used with the belt clip supplied with this product. Use of otheraccessories may not ensure compliance with FCC RF exposure guidelines.Information for DECT ProductThis telephone is compliant with the DECT 6.0 standard which operates inthe 1.92GHz to 1.93GHz frequency range.SEE MARKING ON BOTTOM / BACK OF PRODUCTRISK OF ELECTRIC SHOCKDO NOT OPENWARNING: TOPREVENT FIRE ORELECTRICAL SHOCKHAZARD, DO NOTEXPOSE THISPRODUCT TO RAINOR MOISTURE.THE LIGHTNINGFLASH AND ARROWHEAD WITHIN THETRIANGLE IS AWARNING SIGNALERTING YOU OF“DANGEROUSVOLTAGE” INSIDETHE PRODUCT.CAUTION: TO REDUCE THERISK OF ELECTRIC SHOCK, DONOT REMOVE COVER (ORBACK). NO USERSERVICEABLE PARTS INSIDE.REFER SERVICING TOQUALIFIED SERVICEPERSONNEL.THE EXCLAMATIONPOINT WITHIN THETRIANGLE IS AWARNING SIGNALERTING YOU OFIMPORTANTINSTRUCTIONSACCOMPANYINGTHE PRODUCT.CAUTION:InstallationDigital Security SystemYour cordless phone uses a digital security system to protect against false ringing,unauthorized access, and charges to your phone line.INSTALLATION NOTE: Some cordless telephones operate atfrequencies that may cause or receive interference with nearbyTVs, microwave ovens, and VCRs. To minimize or prevent suchinterference, the base of the cordless telephone should not be placednear or on top of a TV, microwave ovens, or VCR. If such interferencecontinues, move the cordless telephone farther away from theseappliances.Certain other communications devices may also use the 1.9 GHzfrequency for communication, and, if not properly set, thesedevices may interfere with each other and/or your new telephone.If you are concerned with interference, please refer to the owner’smanual for these devices on how to properly set channels to avoidinterference. Typical devices that may use the 1.9 GHz frequencyfor communication include wireless audio/video senders, wirelesscomputer networks, multi-handset cordless telephone systems, andsome long-range cordless telephone systems.Important Installation Guidelines• Avoid sources of noise and heat, such as motors, fluorescent lighting,microwave ovens, heating appliances and direct sunlight.• Avoid areas of excessive dust, moisture and low temperature.• Avoid other cordless telephones or personal computers.• Never install telephone wiring during a lightning storm.• Never install telephone jacks in wet locations unless the jack is specificallydesigned for wet locations.• Never touch non-insulated telephone wires or terminals, unless the telephoneline has been disconnected at the network interface.• Use caution when installing or modifying telephone lines.for use with Model 27907Handset batterypackHandset ChargeCradle HandsetInstalling the Handset BatteryNOTE: You must connect the handset battery before use.CAUTION: To reduce the risk of fire or personal injury, use onlythe Thomson Inc. approved Nickel-metal Hydride (Ni-MH) batterymodel 5-2721, that is compatible with this unit.1. Locate battery which is packaged inside a plastic bag and is separate from thehandset.2. Locate the battery compartment on the back of the handset.3. Plug the battery pack cord into the jack inside the compartment.NOTE: To ensure proper battery installation, the connector is keyedand can be inserted only one way.2. Press the mute/program button to enter the menu. DEREGISTRATION 1YES42NO - - - shows in the display The default setting is "2NO".3. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the caller ID-volume( 6 or 5) button to scroll to 1YES or 2NO.WARNING: It is not recommended that a handset be de-registeredunless absolutely necessary because once a handset is de-registered,that handset’s telephone features cannot be used until the handset isre-registered.4. Select NO, if you do not want to de-register.5. If you select 1YES, press the mute/program button and MOVE NEAR TO BASEdisplays for 2 seconds, then CONFIRM? 1YES 2NO appears in the display.6. Press the touch-tone pad to select 1YES or 2NO, or use the caller ID-volume( 6 or 5) button to scroll to 1YES or 2NO.7. If you select YES, press the mute/program button to confirm. DE-REGISTER...shows in the display. You will hear a confirmation tone. Then HANDSET XDEREGISTERED shows in the display to confirm the handset is deregistered.NOTE: When you complete the de-registration process, HANDSETNEEDS REGISTRATION shows in the display. To use the handset,you MUST re-register the handset using the Registration process.Global De-registrationIf one or more handsets becomes lost, you should de-register all handsets to ensureproper system operation. Follow the steps below to de-register all handsets at thesame time.WARNING: It is not recommended that a handset be de-registeredunless absolutely necessary because once a handset is de-registered,that handset’s telephone features cannot be used until the handset isre-registered.1. Disconnect power from the base by pulling the plug out of the back of the unit.2. Press and hold the Page button and while holding the Page button reconnect thepower.3. Continue to hold the Page button until the charge/in use light flashes rapidly.4. Release the Page button5. Press and release the page button on the base once. All handsets are de-registered and HANDSET NEEDS REGISTRATION shows in the display.Intercom OperationThe intercom feature allows you to have a conversation with another registeredhandset without tying up the telephone line, allowing you to still receiveincoming calls.Making an Intercom Call1. Make sure the handset is OFF (not in talk mode).2. Press the int button on the handset.3. Use the touch-tone pad to select the handset you want to page.NOTE: To cancel page, press the int button again or the *TONE/exitbutton on the sending handset.4. Wait for the person at the receiving handset to press the int button.NOTE: If the receiving handset does not answer within two minutes,the intercom call is automatically canceled. The originating handsetdisplays NO ANSWER.5. When finished, press the *TONE/exit button or int button on either handset todeactivate the intercom.NOTE: The system is expandable up to 4 handsets (by purchaseof optional Model 27918 handset with recharge cradle). When 4handsets are registered, the system can handle 2 separate intercomoperations at once, for example, 1st handset intercoms with 2ndhandset while 3rd handset intercoms with 4th handset.Receiving an Intercom CallWhen you receive an intercom call, your handset beeps. To answer the call press theint button or TALK/CALL BACK button.Advanced Intercom FeaturesReceiving an Incoming Call Duringan Intercom CallIf you receive a telephone call during an intercom call, the intercom call isimmediately terminated and both handsets ring. Either handset user may press theTALK/CALL BACK button to answer the call.Using Intercom with External Telephone CallsDuring a telephone call, you may use the intercom/paging function to page anotherhandset and have an off line, private (two-way) intercom conversation. You may alsohave a three-way conversation between the external caller and the handsets, or youmay transfer the external telephone call to another handset.NOTE: Before you intercom/page another handset, you must decidewhether you want to create a two-way or a three-way conversation.Two-Way Calling1. During an external call, press the int button, and use the touch-tone pad to enterthe handset number you want to call.NOTE: The receiving handset presses the int button to answer theintercom call. Both intercom users may speak privately. The externalcaller will not hear the intercom conversation.2. When finished, press the *TONE/exit button or int button to end the intercom call,return to the talk mode, and resume your original telephone conversation.Three-Way Calling1. During an external call, press the int button. LINE ON HOLD EXTENSION? shows inthe display.2. Use the touch-tone pad to select Handset #. You will hear a paging tone andPAGING shows in the originating handset’s display.NOTE: PAGING FROM... shows in the display on the receiving handset,and the receiving handset presses the int or TALK/CALL BACK buttonto answer the intercom.3. When the receiving handset connects, press the conf/format button on theoriginating handset to conference with the receiving handset and the externalcaller. CONFERENCE shows in the display on the originating and receivinghandsets.NOTE: A handset can enter conference mode directly by pressingTALK/CALL BACK on the second handset during a call.Transferring External Calls to Other HandsetsDuring an external call, you may transfer the external call to another handset.1. Press the int button on the originating handset to put an external call on hold, andthen page the receiving handset.2. Use the touch-tone pad on the handset to select Handset #. You will hear apaging tone. PAGING shows on the originating handset’s display, and PAGINGFROM... shows on the receiving handset’s display.3. When the receiving handset connects, press the TALK/CALL BACK button on theoriginating handset to transfer the call.-OR-4. Press the TALK/CALL BACK button on the originating handset to transfer the call. Ifthe receiving handset does not answer within 30 seconds, the originating handsetrings back and displays CALLBACK. If the originating handset does not answerwithin 20 seconds, the call is automatically dropped.Battery Safety Precautions• Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type,toxic materials could be released which can cause injury.• To reduce the risk of fire or personal injury, use only the Nickel-metal Hydride(Ni-MH) battery listed in the User’s Guide.• Keep batteries out of the reach of children.• Remove batteries if storing over 30 days.General Product CareTo keep your unit working and looking good, follow these guidelines:• Avoid dropping the handset, as well as other rough treatment to the phone.• Clean the phone with a soft cloth.• Never use strong cleaning agents, paint thinner, abrasive powder, alcohol, orother chemical products to clean the unit. Doing so will damage the finish.• Retain the original packaging in case you need to ship the phone at a laterdate.• Periodically clean the charge contacts on the handset and base with a cleanpencil eraser.Causes of Poor Reception• Aluminum siding.• Foil backing on insulation.• Heating ducts and other metal construction that can shield radio signals.• You ’re too close to appliances such as microwaves, stoves, computers, etc.• Atmospheric conditions, such as strong storms.• Base is installed in the basement or lower floor of the house.• Base is plugged into AC outlet with other electronic devices.• Baby monitor is using the same frequency.• Handset battery is low.• You’re out of range of the base.ServiceIf trouble is experienced with this equipment, for repair or warranty information, pleasecontact customer service at 1-800-448-0329. If the equipment is causing harm tothe telephone network, the telephone company may request that you disconnect theequipment until the problem is resolved.This product may be serviced only by the manufacturer or its authorized service agents.Changes or modifications not expressly approved by Thomson Inc. could void the user’sauthority to operate this product. For instructions on how to obtain service, refer to thewarranty included in this guide or call customer service at 1-800-448-0329.Or refer inquiries to:Thomson Inc.Manager, Consumer RelationsP O Box 1976Indianapolis, IN 46206Attach your sales receipt to the booklet for future reference or jot down the date thisproduct was purchased or received as a gift. This information will be valuable if serviceshould be required during the warranty period.Purchase date _________________________________________Name of store _________________________________________IntroductionCAUTION: When using telephone equipment, there are basicsafety instructions that should always be followed. Refer to theIMPORTANT SAFETY INSTRUCTIONS provided with this productand save them for future reference.IMPORTANT: Because cordless phones operate on electricity, youshould have at least one phone in your home that isn’t cordless, incase the power in your home goes out.If you have purchased an extra handset apart from your originalpurchased unit you may find a detailed description of its functions inthe User’s Guide provided with your original purchased unit.If you have purchased an extra handset that is not of the same typeas your original handset you may still use the original User’s Guide tohelp explain the new handsets basic functions and options.Before You BeginParts ChecklistMake sure your package includes the items shown here.4. Insert the battery pack.5. Close the battery compartment by placing the handset back cover slightly higherthan the handset and then sliding the cover down into position.Handset Charging Cradle1. Plug the AC power converter of the charging cradle into the electrical outlet.NOTE: This power adaptor is intended to be correctly orientated in avertical or floor mount position.2. Place the handset in the charging cradle. The charge indicator turns on, verifyingthe battery is charging.3. Allow the phone to charge for 16 hours prior to first use.RegistrationYOU MUST REGISTER THE HANDSET TO THE MAIN BASE BEFORE USE!After the optional handset has charged for 16 hours on the extra charger, HANDSETNEEDS REGISTRATION shows in the display.1. Press the mute/program button. HOLD BASE PAGE FOR 5 SECONDS, THEN PRESSHANDSET PROGRAM shows in the display. (Your handset should be held near thebase during registration process.)2. Press and hold the page button on the base unit until the charge/in use indicatorflashes. Press the handset mute/program button. REGISTERING shows in thedisplay. HANDSET X REGISTERED shows in the handset display, where X is thehandset number. You may now rename your handset. (Refer to Step 3 & 4 ofHandset Name Section)Naming the Handset1. Use the touch-tone pad to enter a name (up to 15 characters).NOTE: If you make a mistake, use the delete button to backspace anddelete one character at a time.2. Press the mute/program button to save your name. You will hear a confirmationtone and the handset name shows in the display.De-RegistrationDe-registration cancels registration. During the de-registration process, keep thehandset near the base.From the Handset Setup Menu:1. Press the caller ID-volume ( 6 or 5) button to scroll to the DEREGISTRATION sub-menu.Equipment Approval InformationRights of the Telephone CompanyShould your equipment cause trouble on y our line which may harm the telephonenetwork, the telephone company shall, where practicable, notify you that temporarydiscontinuance of service may be required. Where prior notice is not practicable andthe circumstances warrant such action, the telephone company may temporarilydiscontinue service immediately. In case of such temporary discontinuance, thetelephone company must: (1) promptly notify you of such temporary discontinuance;(2) afford you the opportunity to correct the situation; and (3) inform you of your rightto bring a complaint to the Commission pursuant to procedures set forth in Subpart Eof Part 68, FCC Rules and Regulations.The telephone company may make changes in its communications facilities,equipment, operations or procedures where such action is required in the operationof its business and not inconsistent with FCC Rules and Regulations. If these changesare expected to affect the use or performance of your telephone equipment, thetelephone company must give you adequate notice, in writing, to allow you tomaintain uninterrupted service.NOTE: The RBRC seal on the battery used in your Thomson Inc. productindicates that we are participating in a program to collect and recycle therechargeable battery (or batteries).For more information go to the RBRC web site at www.rbrc.orgor call 1-800-8-BATTERY or contact a local recycling center.Belt clipBatterycompartmentcoverblack wirered wirebatterypackPRESS DOWNFIRMLYLimited WarrantyWhat your warranty covers:• Defects in materials or workmanship.For how long after your purchase:• One year, from date of purchase.(The warranty period for rental units begins with the first rental or 45 days from dateof shipment to the rental firm, whichever comes first.)What we will do:• Provide you with a new or, at our option, a refurbished unit. The exchange unit isunder warranty for the remainder of the original product’s warranty period.How you get service:• Properly pack your unit. Include any cables, etc., which were originally provided withthe product. We recommend using the original carton and packing materials.• ”Proof of purchase in the form of a bill of sale or receipted invoice which is evidencethat the product is within the warranty period, must be presented to obtain warrantyservice.” For rental firms, proof of first rental is also required. Also print your nameand address and a description of the defect. Send via standard UPS or its equivalentto:Thomson Inc.11721 B Alameda Ave.Socorro, Texas 79927• Pay any charges billed to you by the Exchange Center for service not covered by thewarranty.• Insure your shipment for loss or damage. Thomson Inc. accepts no liability in case ofdamage or loss.• A new or refurbished unit will be shipped to you freight prepaid.What your warranty does not cover:• Customer instruction. (Your Owner’s Manual provides information regardingoperating instructions and user controls. Any additional information, should beobtained from your dealer.)• Installation and setup service adjustments.• Batteries.• Damage from misuse or neglect.• Products which have been modified or incorporated into other products.• Products purchased or serviced outside the USA.• Acts of nature, such as but not limited to lightning damage.Product Registration:• Please complete and mail the Product Registration Card packed with your unit. It willmake it easier to contact you should it ever be necessary. The return of the card isnot required for warranty coverage.Limitation of Warranty:• The warranty stated above is the only warranty applicable to this product.All other warranties, express or implied (including all implied warranties ofmerchantability or fitness for a particular purpose) are hereby disclaimed. Noverbal or written information given by Thomson Inc., its agents, or employeesshall create a guaranty or in any way increase the scope of this warranty.• Repair or replacement as provided under this warranty is the exclusive remedyof the consumer. Thomson Inc. shall not be liable for incidental or consequentialdamages resulting from the use of this product or arising out of any breach ofany express or implied warranty on this product. This disclaimer of warrantiesand limited warranty are governed by the laws of the state of Indiana. Except tothe extent prohibited by applicable law, any implied warranty of merchantabilityor fitness for a particular purpose on this product is limited to the applicablewarranty period set forth above.How state law relates to this warranty:• Some states do not allow the exclusion nor limitation of incidental or consequentialdamages, or limitations on how long an implied warranty lasts so the abovelimitations or exclusions may not apply to you.• This warranty gives you specific legal rights, and you also may have other rights thatvary from state to state.If you purchased your product outside the USA:• This warranty does not apply. Contact your dealer for warranty information.

/ 2

Related manuals for GE 27913