3Battery Safety Precautionsz Do not burn, disassemble, mutilate, or puncture. Like otherbatteries of this type, toxic materials could be released whichcan cause injury.z To reduce the risk of fire or personal injury, use only the batterylisted in User’s Guide.z Keep batteries out of children.z Remove batteries if storing over 30 days.CAUTION:Danger of explosion if battery is incorrectly replaced.Replace only with GP60AAAHC – Ni-MH 1.2V 600mAhrechargeable battery or equivalent.Only use rechargeable batteries with exactly the same specificationsas those supplied with the product. Using non-rechargeable ornon-conforming batteries can damage the product. The batteriescould split or leak if incorrectly inserted, opened or exposed to heat.Never dispose of batteries in a fire: the cell could explode.Check with local code for possible special disposal instruction.InstallationPackaging ContentsModel name: 21825Solo Pack Duo Pack*Base stations 1 1Handsets 1 2Power plugs 1 2Telephone line 1 1Batteries, type AAA, “1.2V600mAh” 2 4Charging station 0 1Operating instructions 1 + optional 1 + optionalPlease check the contents of the package carefully. If anything ismissing or shows signs of transport damage, do NOT put thetelephone into service! In such a case, contact either your sales outletwith the purchase receipt.Note: Keep the equipment package so that it will not be damaged inthe event of transport.Connecting the Base Station and Power PlugConnecting the plugs to the corresponding sockets in the base station(they can not be connected incorrectly because the sockets and plugsare designed prevent reverse poling). Lay the cable under thetelephone to the rear. Plug the telephone line in the telephoneconnection socket. Insert the power plug at the other end in the poweroutlet. The base station in now ready to operate.Only use the connection cable supplied.AC power outletPhone jack