GDC SX-2000 Installation Manual

GDC SX-2000 Installation Manual Manual pdf 27 page image

SX-2000 Installation Manual 11/8/2010GDC Technology Ltd. Page 26 of 423.1.4 Time Zone SetupThe SX-2000 server may or may not arrive with the local time zone set. The following steps showhow to change the time zone on the server.1. Click the power button once to access the Control Panel.2. Click [Admin Panel] to access the Admin Panel.3. Click [Focus] at the far bottom right of the keyboard, then click the cursor in the“Password” text box to enter the password.4. Click [Diagnostics/Maintenance]->[Configure Timezone] to access the Time zoneSelection Page (see Figure 40)Figure 30 Timezone configuration5. Click [Focus] and tap the section above the keypad to bring the pointer into focus.6. Use [↑] and [↓] to highlight the desired timezone.7. Click [Tab] until the [OK] button is highlighted and click [Return] to set the timezone (Donot change the “System clock uses UTC” setting).