GDC SX-2000 Installation Manual

GDC SX-2000 Installation Manual Manual pdf 19 page image

SX-2000 Installation Manual 11/8/2010GDC Technology Ltd. Page 18 of 42Figure 21 IMB 3D 4:4:4 configuration on SX-2000 server2.6.1.1 NEC Series 2 projectorsThe IMB 3D macros on existing NEC Series 2 projectors are configured for ‘4:2:2’ input.If the ‘IMB 3D 4:4:4’ option is checked in SMS configuration, all IMB 3D macros should bechanged to use ‘4:4:4’ input.2.6.1.2 Barco Series 2 projectorsThe IMB 3D macros on existing Barco S2 projectors are configured to use the‘GDC_IMB_422.input’ file.If the ‘IMB 3D 4:4:4’ option is checked in SMS configuration, all IMB 3D macros should use theinput file named ‘Mediablock.input’.2.6.1.3 Christie Series 2 projectorsThe ‘IMB 3D 4:4:4’ option in SMS configuration must be checked.No additional configuration is required for the projector.3 SX-2000 server configurationThis section describes the steps necessary to set up the SX-2000 and configure it to work withsupported cinema equipment.