GCC Technologies LaserPro X500 III-80Y User Manual

Contents

GCC Technologies LaserPro X500 III-80Y User Manual Manual pdf 14 page image

13 232001260G(10)Chapter II - Unpacking & Contents2.1 Unloading and UnpackingThe LaserPro X500 SERIES is shipped in one crate that contains the machine, the software, andall of the necessary accessories.The following section contains detailed step-by-step instructionsfor unpacking and assembly of the machine.WARNINGTo prevent personal injury or damage to the machine, please obtain assistancewhen loading and unloading the shipping crate.NOTEPlease save the original shipping crate. If the machine must be returned forproduct servicing, it will need to be packed in its original shipping crate. Themachine is heavy. To prevent damage to the machine or injury to personnel,please get assistance. Do not try to lift the equipment alone.Perform the following steps to unpack your machine.Step 1 Use an M12 open end or impact wrench to unscrew and remove the top.Step 2 Remove the 4 sides of the crate one by one.Step 3 Take the protective wrap off the machine.