Command Specifications4-118 C141-C009(12) SMART status page (X'2F')Table 4.83 SMART status page (X'2F')[Fujitsu unique page]BitByte 7 6 5 4 3 2 1 00 0 0 1 0 1 1 1 11 X‘00’ (Reserved)2 Page Length (MSB)3 Page Length (LSB)4SMART Status ParameternThis page contains parameters which allow the application client to check thepredictive drive failure condition of the IDD. The application client can checkwhether the IDD has predicted a drive failure by periodically reading out thispage.The "Page Length" field indicates the length (byte length) after byte 4.The "SMART Status Parameter" field is Fujitsu unique parameters. The details ofthis field are outside the scope of this manual.(13) SMART data page (X'38')Table 4.84 SMART data page (X'38')[Fujitsu unique page]BitByte 7 6 5 4 3 2 1 00 0 0 1 1 1 0 0 01 X‘00’ (Reserved)2 Page Length (MSB)3 Page Length (LSB)4Log ParametersnThis page reports data which the IDD collects for predicting drive failures.The "Page Length" field indicates the length (byte length) after byte 4.The "Log Parameters" field is Fujitsu unique parameters. The details of this fieldare outside the scope of this manual.~~ ~~ ~~~~ ~~ ~~