Fujitsu FI-5530C2 Operator's Manual

Also see for fi-5530C - Document Scanner: Getting started Specifications Installation procedures Installation procedures Installation procedures

Contents

36⇒ A document is scanned with the scanner, and the scanned document image isdisplayed on the ScandAll PRO window, and then the image is saved to file.For information about other scanning operations, refer to chapter "2 SCANNING VARIOUSTYPES OF DOCUMENTS" on page 45.For more details about the features and operations of ScandAll PRO, refer to [ScandAll PROHelp].HINTWhen you use FUJITSU TWAIN 32 Scanner Driver, clicking the [Scan]button may display the scanner driver’s setup dialog box. If so, you canalso change settings in the dialog box displayed.Click the [Scan] button to scan documents.Click the [Close] button when you finish scanning.If you do not want to display the scanner driver’s dialog box after clickingthe [Scan] button in step 7, do the following:In the [Scan Settings] dialog box, clear the [Show TWAIN dialog beforeeach batch scan process] checkbox.HINT• If you do not mark the [Save to file] checkbox in the [Scan Settings] dialogbox, scanned document images are not saved. To save the files, from the[File] menu, select [Save As].• To scan the next document with the same settings, from the [Scan] menu,select [Scan]. Or, click the [Scan] button ( ) on the toolbar.