Appendix A Parameter ListA.7 Advanced Copy ManagementETERNUS Web GUI User’s Guide (Settings)Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0944• Check to use as RAInput condition/Display contents • For the ETERNUS DX8100 S2/DX8700 S2- FC 1-Port- FC 2-Port- FC 4-Port- iSCSI 1-Port- iSCSI 2-Port- iSCSI RA (for older storage system connection)- "-" (hyphen)• For the ETERNUS DX90- FC 4-Port- "-" (hyphen)• For the ETERNUS DX410/DX440/DX8100/DX8400/DX8700 or for the ETERNUS4000/ETERNUS8000- FC 1-Port- FC 2-Port- FC 4-Port- iSCSI-RA 1-Port- iSCSI-RA 2-Port- "-" (hyphen)• For the ETERNUS6000- FC 2-Port- FC 4-Port- "-" (hyphen)Description Regardless of whether a copy path is applied or not, select all of the RA ports and CA/RAports.The port number is displayed at right side of the checkbox. When "iSCSI RA (for olderstorage system connection)", "iSCSI-RA 1-Port", or "iSCSI-RA 2-Port" is selected in the "PortType" field, all ports are automatically selected.This item is displayed when the model is other than ETERNUS6000.Input condition/Display contents• #x: Port number (0 - 3)• When "FC 1-Port" is selected as the port type (#1, #2 and #3 cannot be selected)#0• When "FC 2-Port" is selected as the port type (#2 and #3 cannot be selected)#0, #1• When "FC 4-Port" is selected as the port type#0, #1, #2, #3• When "iSCSI 1-Port" is selected as the port type (#1 cannot be selected)#0• When "iSCSI 2-Port" is selected as the port type#0, #1• When "iSCSI-RA" is selected as the port type (All ports are selected)#0, #1• When "iSCSI-RA 1-Port" is selected as the port type (#0 is selected)#0• When "iSCSI-RA 2-Port" is selected as the port type (All ports are selected)#0, #1
