Appendix A Parameter ListA.1 System ManagementETERNUS Web GUI User’s Guide (Settings)Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0669• Time Zone (time difference setting)● Daylight Saving Time Settings• Daylight Saving Time• Range (By day of the week)• Range(by Date)● NTP Settings• Synchronize with NTP ServerDescription When selecting "Manually" in the time zone field, specify the time difference from GMT.Input condition/Display contents• Time differenceSelect "+" or "-".• Hour00 - 12• Minute00, 15, 30, 45Description Select whether to enable or disable the Daylight Saving Time.Input condition/Display contents • Enable• DisableDescription If Daylight Saving Time is enabled, and "by day of the week" is selected for the range,specify the start day, end day, and start time and end time.Input condition/Display contents• Start day and end day (Month: 01 - 12 Week: 1st - 4th week and the last week ofmonth Day: Monday - Sunday)• Start time and end time Hour (00 - 23)Description If Daylight Saving Time is enabled, and "by Date" is selected for the range, specify thestart date, end date, and start time and end time.Input condition/Display contents• Start date and end date (Month: 01 - 12 Day: 01 - 31 and the Last Date)• Start time and end time Hour (00 - 23)Description When performing the time synchronization with the NTP server, select "Enable". If thetime synchronization is not used, select "Disable".Input condition/Display contents• Enable• Disable
