Fujitsu Docking Station PenCentra 200 Installation Instructions Manual

Also see for PenCentra 130: User guide User guide User guide User instructions User instructions

PenCentra 130 and PenCentra 200 are trademarks of Fujitsu PC Corporation. © 2000 Fujitsu PC Corporation6/00 58-0687-00BFMWHS3Hand StrapInstallation InstructionsPenCentra 130 and 200The hand strap can be attached to your PenCentra 130 orPenCentra 200 pen tablet to provide additional supportwhile using the system in a hand-held position.Installing the Hand Strap 0The hand strap can be installed in on of two locations onthe pen tablet to accommodate right- or left-handedusers. To install the hand strap,1. Using a sharp object such as a penknife, pry theround, adhesive covers from the back of the systemto expose the screw bosses in the location that youwant to install the hand strap. See Figure 1 for thescrew boss locations.Figure 1. Hand Strap Fastening Points2. Use the screws provided to attach the hand strap inthe desired location as shown in Figure 2.3. The hand strap is now attached to your system.Using the Hand Strap 04. If you are a right-handed user, install and use thehand strap as shown in Figure 3. The Velcro stripon the hand strap allows you to adjust the strap tothe most comfortable position. If you are aleft-handed user, install and use the hand strap asshown in Figure 4.Left Handed UserRight Handed UserSerialPortDoorRemovableBattery PackFigure 2. Installing the Hand Strap.Figure 3. Using the Hand Strap (Right-handed User)Figure 4. Using the Hand Strap (Left-handed User)

/ 1

Related manuals for Fujitsu PenCentra 130