Operation 2. TEACH Mode38 RC700 / RC90 option TP2 Rev.112.1.10 Changing Local / Tool / Arm / ECPThe following describes how to change Local / Tool / Arm / ECP.Changing Local number(1) Press the key.It turns to the Local number input mode.Local: 00(2) Using the numeric keys and arrow keys, input the Local number you want to change.In this example, the number is “15”.Local: 15(3) Press the key.The Local number has changed and it returns to the [Jog & Teach] screen.When you press the key, it returns to the [Jog &Teach] screen withoutsaving the change.Changing Tool number(1) Press the key.It turns to the Tool number input mode.01 000 LJM T00A00 ■(2) Using the numeric keys and arrow keys, input the Tool number you want to change.(3) Press the key.The Tool number has changed and it returns to the [Jog & Teach] screen.When you press the key, it returns to the [Jog &Teach] screen withoutsaving the change.Changing Arm number(1) Press the key.It turns to the Arm number input mode.01 000 LJM T00A00 ■(2) Using the numeric keys and arrow keys, input the Arm number you want to change.(3) Press the key.The Arm number has changed and it returns to the [Jog & Teach] screen.When you press the key, it returns to the [Jog &Teach] screen withoutsaving the change.TIPTIPTIP |
