Epson L380 Start Here Manual

Also see for L380: User guide User guide

Contents

Start HereRead these instructions before using your product.1 UnpackNote: Do not open the ink bottles until you are ready to fill the inktanks. The ink bottles are vacuum packed to maintain reliability.1 Remove all protective materials from the product.2 Lift up the scanner unit and remove all protective materialsfrom inside the product.Caution: Do not touch the flat white cable or the ink tubes andtheir translucent cover.3 Lower the scanner unit.4 Unhook the ink tank unit from the printer.2 Fill ink tanksNote: This product requires careful handling of ink. Wear disposablegloves and place a sheet of paper under the ink tank unit when youfill or refill the ink tanks, as ink may splatter. If ink spills, wipe it offimmediately with a damp towel to avoid permanent stains. If ink gets onyour clothes or belongings, it may not come off.Caution: Keep the ink bottles out of the reach of children and do notdrink the ink.1 Open the ink tank unit cover, then remove the cap for thecyan ink tank and attach it to its holder.2 Unpack the cyan ink bottle.3 Snap the bottle tip off, then remove the bottle cap.Carefully remove the protective seal (avoid touching the inkunderneath the seal), then close the bottle cap tightly.Caution: Be sure to close the bottle cap tightly, or ink may leak.456789L380

/ 4

Related manuals for Epson L380