10. Make sure to install the cap onto the ink tank securely.11. Pack the printer in its box using the protective materials.When you use the printer again, make sure you remove the tape securing the print head. If print quality hasdeclined the next time you print, clean and align the print head.Related Information& “Part Names and Functions” on page 15& “Checking and Cleaning the Print Head” on page 139& “Aligning the Print Head” on page 141Accessing the External Storage Device From aComputerYou can write or read data on an external storage device such as a memory card that has been inserted in theprinter from a computer.c Important:❏ Insert a memory card after removing write protection.❏ If an image is saved to the memory card from a computer, the image and the number of photos are not refreshedon the LCD screen. Remove and insert the memory card again.❏ When sharing an external device inserted in the printer between computers connected over USB and over anetwork, write access is only allowed to the computers that are connected by the method you selected on theprinter. To write to the external storage device, select a connection method in the following menu on the printer'scontrol panel.Setup > System Administration > Printer Settings > Memory Device Interface > File SharingNote:It takes a while to recognize data from a computer if a large external storage device, such as 2TB HDD, is connected.WindowsSelect an external storage device in Computer or My Computer. The data on the external storage device isdisplayed.User's GuideAppendix224
