Epson L1455 Instructions Manual

Also see for L1455: User guide User guide User guide

Contents

Start HereRead these instructions before using your product.1 UnpackNote: Do not open the ink bottles until you are ready to fill the inktanks. The ink bottles are vacuum packed to maintain reliability.1 Remove all protective materials from the product.2 Lift up the scanner unit and remove all protective materialsfrom inside the product.Caution: Do not touch the translucent part or ink tubes.3 Lower the scanner unit.2 Fill ink tanksNote: This product requires careful handling of ink. Wear disposablegloves and place a sheet of paper or plastic under the ink tank whenyou fill or refill the ink tanks, as ink may splatter. If ink spills, wipe it offimmediately with a damp towel to avoid permanent stains. If ink getson your clothes or belongings, it may not come off.Warning: Keep the ink bottles out of the reach of children and do notdrink the ink.1 Open the ink tank unit cover, then remove the cap for theblack ink tank and attach it to its holder.2 Unpack the black ink bottle.3 Snap the bottle tip off, then remove the bottle cap.Carefully remove the protective seal (avoid touching the inkunderneath the seal), then close the bottle cap tightly.Caution: Be sure to close the bottle cap tightly, or ink may leak.4 Fill the tank using all of the ink in the bottle.Note: Refer to the color-coded sticker above the ink tank unit toidentify the color of each tank.Caution: Be sure to fill each tank with the correct color.5 Carefully seal the bottle using the reverse side of the bottletip for proper disposal.L1455

/ 4

Related manuals for Epson L1455