Epson ES1000 Quick Setup Manual

Contents

Quick SetupUsing the screenTo open the screen:1 Lower each foot to lock it in place.CAUTION: Make sure the feet are locked in place, or the screen couldfall over.2 Press the latches on the front and back of the case to open it.3 Open the screen to its full width. You can display a 50” (diagonal) 4:3image.To close the screen:1 Holdthe left and right halves of the case and bring them together. Makesure the case latches shut.CAUTION: Be careful not to pinch your fingers when closing the case.2 Squeeze each foot, then fold it up against the case.Tip: Make sure the foot is centered in the hinge; you may need toreposition it when squeezing.Where to get helpInternet supportVisit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) andselect your product for solutions to common problems. You can downloadproduct documentation, get FAQs and troubleshooting advice, or e-mail us withyour questions.Speak to a support representativeBefore you call for support, please have the following information ready:• Product name (ES1000 projection screen)• Product serial number (located on the case)• Description of the problemThen call:U.S.: (562) 276-4394, 6 AM to 8 PM, Pacific Time,Monday through Friday, and 7 AM to 4 PM, Saturday.Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time,Monday through FridayOnce connected, follow the voice prompts to video projector support. Toll orlong distance charges may apply. Days and hours of support are subject tochange without notice.Purchase supplies and accessoriesYou can purchase projectors and accessories from an Epson authorized reseller.To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you canpurchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadiansales).Safety instructionsRead this document carefully to use the product safely and effectively. To solveany problems, keep this information close at hand.To prevent personal injury or damage to property, the following symbols areused to show dangerous operation or handling:Warning This symbol indicates information that, if ignored, could possiblyresult in personal injury or even death due to incorrect handling.Caution This symbol indicates information that, if ignored, could possiblyresult in personal injury or physical damage due to incorrect handling.WarningDo not set up the screen near a heater, fireplace, or other heat source. Becauseit is made from plastic materials, it could catch fire.CautionDo not set up the screen on a slope or unstable surface. The screen could falland cause injury.Do not set up the screen outdoors or in front of a window or air conditionerwhere it may be in path of the air flow. The screen could fall and cause injury.Make sure the feet are fully open and locked in position when you use thescreen. If the feet are not locked, the screen could fall and cause injury.Do not disassemble or modify the screen. Parts may spring out and cause aninjury.Be careful not to catch your fingers in the scissor frame on the back of thescreen or in the screen case when closing it.If there are young children nearby, make sure they do not play with the screen.It could pinch their fingers, or fall on them and cause injury.When storing the screen, make sure you prevent it from falling, or it couldcause injury.ES1000 Projection Screen

/ 4

Related manuals for Epson ES1000